Schwinn MPower Console V2 Specifications download pdf (Page 11)

Display Results

Device Pairing

2. Push the STAGE and AVG/END buttons for 5 seconds to go to Service Mode.

3. Tap the AVG/END button until you see the Power menu option, and push the Backlight button.

4. Push the STAGE orAVG/END button to see the Power submenu options—Sport(not power enabled) and Perform (power enabled).

••

•

If you haveaPower Sensor, go to the Perform option and push the Backlight button to set.

••

•

If there is no Power Sensor, goto the Sport option and push the Backlight buttonto set.

5. The console goes back to the Service Mode menu and the Power menu option appears.

6. Make sure that the switch (U) on the Speed Sensor is set to S (speed).

7. Push the pairing buttons on the Console (L1), the Speed Sensor (L2) and the Power Sensor (L3), if applicable.

8. The console display shows PPP and the time display counts down from 0:35 (seconds).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Schwinn MPower Console V2 Specifications Page 11