Schwinn 130 (2013 model) Owner's Manual

ASSEMBLY MANUAL / OWNER’S MANUAL Manual en Español Latino Americano:http://www.schwinnfitness.com130 / 1.0170 / 1.5

104. Install Console on Console Mast Note: Remove the pre-installed screws(*) from the back of the Console before you connect the cables. NOTICE:

115. Install Seat Post on Frame NOTICE: Make sure the Adjustment Knob engages the Seat Post. Do not set the Seat Post position higher than the stop

127. Install Pedals Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a

138. Install Water Bottle Holder Note: The hardware(*) is pre-installed on the Console Mast and not on Hardware Card.14X2*9. Connect AC Adapter10. F

14Leveling Your BikeLevelers are found on each side of the Rear Stabilizer. Turn the knob to adjust the stabilizer foot. Make sure the bike is level a

15!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.Before using this equipment, obey

16FEATURESA Console J Power ConnectorB Handlebars K Water Bottle HolderC Adjustable Seat L MP3 InputD Adjustment Knob M USB PortE Pedals N Contact Hea

17Console FeaturesThe Console provides important information about your workout and lets you control the resistance levels while you exercise. The Con

18FAN button- Controls 3-speed fanResistance Level Quick Buttons- Shifts the resistance levels to the setting quickly during a workoutAchievement Indi

19Achievement DisplayThe Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past workouts. The Cons

2Important Safety Instructions - Assembly 3 Safety Warning Labels / Serial Number 4Specifications 4Before Assembly 5Parts 6Hardware 7Tools 7Assembl

20Contact Heart Rate SensorsContact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel part

2120-24FAT-BURNING TARGET HEART RATEHeart Rate BPM (beats per minute)Age25-2905010015020025030-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69 70+1961911

22OPERATIONSWhat to WearWear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you to move freely.How Often S

234. Push OK to set. 5. Units of Measurement: Push the Increase/Decrease buttons to adjust between “MILES” (Imperial English) or “KM” (metric).6.

24Edit User Profile1. From the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Profiles.2. Push the OK

256. Push OK to make your selection.7. The Console will go to the Power-Up Mode screen.Changing Resistance LevelsPush the Resistance Level Increase(

26Workout Profile and Goal ProgramThe Console lets you select the Profile Program and type of Goal for your workout (Distance, Time or Calories), and s

273. Push the Increase() or Decrease() buttons to select the Goal type, and push OK.4. Push the Increase() or Decrease() buttons to set the goal

28GOAL TRACK Statistics (and Achievements)The statistics from every workout are recorded to a User Profile.The Schwinn Dual Track™ Console shows the Go

296. Push the Increase() button to move to the “CLEAR WORKOUT DATA -OK?”. Push OK, and the “ARE YOU SURE? - NO” prompt will display. Push the Incr

3IMPORTANT SAFETY INSTRUCTIONS — ASSEMBLY!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious in

30The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric, change the machine type, control

31Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to do the necessary tasks.!E

32JHIDQNOPSTUVGJABKREFDXWCCBBYZAACCMDDEEAJLMaintenance PartsA Console L HR Cables W FlywheelB Console Mast M CHR Sensors X Brake AssemblyC Pedals N Se

33TROUBLESHOOTINGCondition/Problem Things to Check SolutionNo display/partial display/unit will not turn onCheck electrical (wall) outletMake sure uni

34Condition/Problem Things to Check SolutionCheck data cableconnections/orientationBe sure cable is connected securely and oriented properly. Small la

35WARRANTYWho Is CoveredThis warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).What Is Cov

36SEARS CUSTOMER WARRANTYWho Is CoveredThis warranty is valid only to the original purchaser and is not transferable or applicable to any other person

37

Nautilus® Bowflex® Schwinn® Universal®8002150.100114.FEN

4SAFETY WARNING LABELS AND SERIAL NUMBERFCC Compliance!Changes or modifications to this unit not expressly approved by the party responsible for compli

5SPECIFICATIONS41.3” (105cm)21.4” (54cm)55.6” (141cm)Before Assembly Select the area where you are going to set up and operate your machine. For safe

6PARTSItem Qty Description Item Qty Description1 1 Main Frame 9 1 Seat Post2 1 Front Stabilizer 10 1 Adjustment Knob3 1 Rear Stabilizer 11 1 Seat4 1

7HARDWARE / TOOLSToolsIncluded Not Included6 mm(recommended)Item Qty DescriptionA 4 Button Head Hex Screw M8 x 25B 5 Lock Washer M8C 4 Curved W

8ASSEMBLY1. Attach Stabilizers to Main Frame Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport w

93. Install Handlebars on Console Mast NOTICE: Do not crimp the cables. Put the Handlebar (7) in the bracket (6a), adjust the Handlebar to the desi