Schwinn 420 Owner's Manual download pdf (Page 10)

Assembly

Parts

• Main Unit (from Step 2)

• #4 - Water Bottle Holder

(Two parts: (4a) outer ring, (4b) - base)

• #6 - Console Mast (Qty. 1)

• #21 - Mast Boot (Qty. 1)

Hardware

• #24 - M8 Flat Washer (Qty. 5)

• #25 - M8 Lock Washer (Qty. 5)

• #26 - M5x25 Phillips Head Screw (Qty. 2)

• #29 - M8x15 Hex Screw (Qty. 5)

Tools

• Phillips Head Screwdriver

3-1 Put the Console Mast into the Mast Boot.

3-2 Connect the wire harness (W1) from the Main Unit to the

wire harness (W2) in the Console Mast.

3-3 Move the Console Mast down on the Main Unit. Secure

the Console Mast with the hardware shown.

NOTICE: Do not pinch the wires when putting the

Console Mast on the Main Unit.

3-4 Move the Mast Boot down to the Main Unit.

3-5 Attach the Water Bottle Holder to the Console Mast with

the hardware shown.

Step 3: Install Console Mast and Water Bottle Holder

Assembly Manual

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Schwinn 420 Owner's Manual Page 10