Schwinn iC2 Owner's Manual

ASSEMBLY MANUAL / OWNER’S MANUAL Manual en Español Latino Americano:http://www.schwinnfitness.com

104. Install Handlebar Assembly on Frame NOTICE: Make sure the adjustment knob (8a) engages the holes in the Handlebar Post.3. Attach Handlebars t

115. Attach Pedals to Frame Assembly Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientati

126. Attach Water Bottle Holder to Handlebar10EF7. Install Batteries in Console Note: The console uses AA size batteries (LR6), which are not inclu

138. Connect and Attach the ConsoleNOTICE:DonotcrimpConsoleCable.11

149. Final InspectionInspect your machine to ensure that all hardware is tight and components are properly assembled.Be sure to record the serial numb

15!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.Before using this equipment, obey

16A Console I PedalsB Handlebar Assembly J FlywheelC AdjustmentKnob K Brake AssemblyD Brake/ResistanceKnob L Chain GuardE Seat M Transport WheelsF S

17Console FeaturesThe Console provides information about your workout on the display screen. You can also use the button to get access to information

18RPMTheRPMdisplayeldshowsthemachinerevolutionsperminute(RPM).Themaximumdisplayis200.CALTheCALdisplayeldshowstheestimatedcalor

19OPERATIONSWhat to WearWear rubber-soled athletic shoes or appropriate cycling shoes. You will need the appropriate clothesforexercisethatallowy

2Important Safety Instructions - Assembly 3 Safety Warning Labels / Serial Number 4Specifications 5Before Assembly 5Parts 6Hardware 7Tools 7Assembl

20Handlebar AdjustmentLoosen and pull the adjustment knob on the handlebar mount. Adjust the handlebar assembly to the desired height. Release the adj

21SERVICE MODEService Mode lets you set the units of measure to either English or Metric, see machine statistics and firmware version (for technician u

22Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to do the necessary tasks.!E

23Maintenance PartsA Console H Pedals O Speed Sensor MagnetB Handlebars I Seat P RPM SensorC Brake/ResistanceKnob J Seat Post Q Sprocket driveD Brake

24Chain LubricationRemove the chain guard door and apply a few drops of bike chain oil to the chain.!Donotapplyoilwhenthechainismoving. Note

25TROUBLESHOOTINGCondition/Problem Things to Check SolutionConsole will not power up/turn on/startBatteries Make sure batteries are installed correctl

26Unit rocks/does not sit level Check leveler adjustment Leveling feet may be turned in or out to level bike.Check surface under unit Adjustment may n

27

Nautilus® Bowflex® Schwinn® Fitness Universal®004-4625.060611.A

3!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.Obey the following warnings:!Read a

4SAFETY WARNING LABELS AND SERIAL NUMBER••••••250lbs. (113kg).••••••250lbs. (113kg).

5SPECIFICATIONS48.4”(123cm)22.2” (56.4cm)44.5” (113cm)Before Assembly Select the area where you are going to set up and operate your machine. For safe

6Item Qty Description Item Qty Description1 1 Main Frame 7 1 Seat Post2 1 Front Stabilizer 8 1 Handlebar Post3 1 Rear Stabilizer 9 1 Handlebar4 1 Peda

7ToolsIncluded Not Included6 mmItem Qty DescriptionA 4 ButtonHeadHexScrewM8x56B 2 ButtonHeadHexScrewM8x20C 8 Flat Washer M8D 2 Lock Nu

81. Attach Stabilizers to Frame AssemblyASSEMBLY123CAACCD

92. Attach Seat to Seat Post and Frame NOTICE: Slide the Seat (6) onto the Seat Post (7) and install the Seat Post in the Frame. Make sure the adj