Schwinn 420 Owner's Manual download pdf (Page 5)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the

locationmustbeonahard,levelsurface.Allowaworkoutareaofaminimum74”x130”(1.9mx

3.3m).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1. Read and understand the “Important Safety Instructions” before assembly.

2. Collect all the pieces necessary for each assembly step.

3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,

and the left (counterclockwise) to loosen, unless instructed otherwise.

4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt

through the holes.

5. Theassemblyrequires2people.

Note:Someaxlescontainoil.Usecautiontoavoidstainingclothesorcarpet.

SpECIFICATIONS

71”

(180.3 cm)

26” (66 cm)

62” (157.5 cm)

Maximum User Weight: 300 lbs. (136 kg)

Power Requirements:

Operational Voltage: Operational Voltage 9VDC

Operating Current: 1500 mA

Regulatory Approvals:

AC Power Adapter: UL listed, CSA certiﬁed (or

equivalent),Rated120V60Hz

Input, 9VDC, 1500mA Output.

Class 2 or LPS.

determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe

interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris

connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

1 2 3 4 5 6 7 8 9 10 ... 39 40

No comments

Schwinn 420 Owner's Manual Page 5