Schwinn A25 Recumbent Bike Owner's Manual download pdf (Page 13)

11. Install Batteries in Console

Note:TheconsoleusesDsizebatteries(LR20).Make

sure that the batteries point in the direction

of the +/– indicators in the battery bay. If you

use rechargeable batteries, the optional power

adapter will not recharge the batteries.

Donotmixoldandnewbatteries.

Donotmixalkaline,standard(carbon-zinc),or

rechargeable (Ni-Cd, Ni-MH, etc) batteries.

–

Optional Power Adapter

The console for your machine can operate on battery power or AC power. For AC power, it is necessary to order the

optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to operate.

Note: If you use rechargeable batteries, the optional Power Adapter will not recharge the batteries.

After the machine is fully assembled, connect the Power Adaptor to the console and the wall outlet.

NOTICE: If you use a power adapter for your bike, make sure that the cord stays clear of the path of the pedals.

Attach the cord to the machine as shown:

NOTICE: It is recommended to remove batteries when they are not used, to avoid damage from battery corrosion.

To order the optional Power Adapter, go to: www.schwinnfitness.com/powersupply

Or call 1 (800) 605–3369.

12. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Be sure to record the serial number in the field provided at the front of this manual.

Donotuseorputthemachineintoserviceuntilthemachinehasbeenfullyassembledandinspectedforcorrect

performance in accordance with the Owner’s Manual.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Schwinn A25 Recumbent Bike Owner's Manual Page 13