Schwinn A25 Recumbent Bike Owner's Manual download pdf (Page 25)

TROUBLESHOOTINg

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

If bike has AC adapter, check

electrical (wall) outlet

Make sure unit is plugged into a functioning wall outlet.

If bike has AC adapter, check

connection at unit

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

If bike has batteries, check

Battery Indicator on console

or check batteries.

Replace the batteries. It may be necessary to replace the

batteries although the Battery Indicator is not on.

Check data cable integrity All wires in cable should be intact. If any are visibly

crimped or cut, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented prop-

erly. Small latch on connector should line up and snap

into place.

Check console display for

damage

Check for visual sign that console display is cracked or

otherwise damaged. Replace Console if damaged.

ConsoleDisplay If Console only has partial display and all connections are

ﬁne, replace the Console.

If the above steps do not resolve the problem, contact

Customer Care for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

Sensor grip Be sure hands are centered on HR sensors. Hands must

be kept still with relatively equal pressure applied to each

side.

Dryorcallousedhands Sensors may have difﬁculty with dried out or calloused

hands. A conductive electrode cream such as “Signa

Crème” or “Buh-Bump” can help make better conduct.

These are available on the web or at medical or some

larger ﬁtness stores.

Handlebars If tests reveal no other issues, Handlebars should be

replaced.

Console displays “E2” error

code

Check data cable integrity All wires in cable should be intact. If any are cut or

crimped, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented prop-

erly. Small latch on connector should line up and snap

into place.

Console electronics If tests reveal no other issues, Console should be re-

placed.

No speed/RPM reading,

Console displays “E3” error

code

Check data cable integrity All wires in cable should be intact. If any are cut or

crimped, replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented prop-

erly. Small latch on connector should line up and snap

into place.

Check magnet position

(requires shroud removal)

Magnet should be in place on pulley.

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Schwinn A25 Recumbent Bike Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for Spin bikes Schwinn A25 Recumbent Bike