Schwinn Fitness 126 Owner's Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
USING THE 126/226 COMPUTER
Auto Shut-Off (Sleep Mode)
The console will automatically shut off in approximately 2 minutes without
use or input. There is no on/off switch. (Press any button to power up the
console and “ENTER PROGRAM” appears in the alphanumeric display.)
Information Mode
The computer enables you to switch between English or Metric units by
pressing and holding the UP and DOWN buttons simultaneously for 3
seconds. Use the
UP or DOWN button to select “ENGLISH” or “METRIC”
and press
ENTER to confirm. The computer will enter the Information
Mode. In the Information Mode, by following the displayed menu and
prompts, you will be able to:
Select ENGLISH measurement units which sets the computer for:
Miles
Miles/hour
Pounds
Inches
Or select
METRIC measurement units which sets the computer for:
Kilometers
Kilometers/hour
Kilograms
Centimeters
See Total Distance
See Total Hours
Press
ENTER and then the software version will display. Press ENTER again
to exit the Information Mode and the computer will bring you to the
“ENTER
PROGRAM” mode.
Grip Heart Rate
This Schwinn
®
bike is equipped with grip heart rate sensors located on
the handlebars. You must contact these sensors with both hands so the
computer can detect your pulse. The computer uses information detected
by the grip heart rate sensors for many of the software features. Make sure
you are griping the pods and look for the flashing “heart” icon and pulse
rate located on the lower right portion of the LCD display (to the left of the
CYCLIST icon) indicating that a pulse signal is being received. If there is no
display please see the section titled “IMPORTANT Things You Should Know
Before Exercising”
for more information.
15
OPERATION
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comments to this Manuals

No comments