Schwinn Windrigger Installation Manual download pdf (Page 37)

Maintenance

Checking the Baffery Charge

1. Using your mu_timeter, touch the red lead to the positive terminaJ

a diluted, non°rain of the battew and the black lead to the negaUve terminal

2. If me vo_tage leve_ is less than 6.1 VDC, charge the ba_ewo

Charging the Battery Back=Up

The StairMasteP _ Commercial Series SC916 StairgJimber is selfpowered (cordless}

with a rechargeaNe baEew bacbup. TypicaH% the StairClimber can be operated

without p_ugging in the externa_ power suppb/, if, however, the console flickers

during operation orthe console display does not light up while using the machine,

then use the externa_ power supply to recharge the bakery back-up.

The external power supply is suppJied with the unit and p_ugs into a standard

115 volt, 15 amp out_et, or a 220 volt, 10 amp oudeL {AH maior voltage plugs are

availlaNe.} The plugoin for the extema_ power supply is _ocated in the front of the

machine atthe base.

IMPORTANT: If #_staHing the opSonal LCD Monitor, refer to the NV915 installation

manual at this 5me.

Plug the wall pack externa_ power supply into the connector and charge the ba_ew

for approximately 24 hours and then recheck it. it is okay to use the machine whi_e

the external power supply is connected.

The console will power on as user starts to move the pedals of:the machine, and

will stay [it for u p to 60 seconds in pause mode. The console wi[[ power off after

60 seconds of stopping exercise. The console will power on and remain powered

whenever the external power supply is connected°

Battery Disposal

When ordering new bakeries, you will need to property dispose of: {recycJe)your old

Jeadoacid bakeries. Most federaJ and state regulations require Jeadoacid bakeries

to be recycJedo Do not throw away aid bakeries. Lead is a toxic heavy metal,

hazardous to living organisms.

1 2 ... 32 33 34 35 36 37

No comments

Schwinn Windrigger Installation Manual Page 37